- +64 9 889 0246
- info@dualcom.co.nz
>
SKU:
PSU-60W-12V-IP67 IP67 60W Constant Voltage power supply. Designed for Indoor or Outdoor installations, and includes pre-wired NZ moulded plug.
Features
Short Circuit / Overload / Over Temperature Protection
Cooling by free air convection
100% Full Load Burn-In Test
Suitable for Constant Voltage LED Lighting
IP67 / CE / SELV / SAA
Specifications
Output
DC Voltage : 12V
Rated Current : 5A
Current Range : 0~5A
Rated Power : 60W
Ripple & Noise (max) : 150mV
Voltage Tolerance : ±0.5V
Setup Rise Time : 80ms / 220vAC
Hold Up Time (typ) : 60ms / 220vAC
Input
Voltage Range : 170 ~ 265vAC
Frequency Range : 47~63hZ
AC Current (typ) : 0.57A / 220vAC
Insrush Current (typ) : Cold Start 50A / 220vAC
Protection
IP Rating : IP67 Waterproof
Short Circuit : Hiccpe mode, Recovers automatically after condition removed
Overload : Protected 145-160% above peak rating
Over Temp : Shut down o/p voltage, re-power on
Standards : IEC 61347-2-13:2006, AS/NZS 61347.1:2002, AS/NZS CISPR 15: 2005+A1 : 2006+A2: 2008, EMC, SELV, SAA, ROHS
Mechanical
Dimensions : 180 x 68 x 53mm (L x W x H)
Output Voltage:
12vDC
IP67 60W Constant Voltage power supply. Designed for Indoor or Outdoor installations, and includes pre-wired NZ moulded plug.
Features
- Short Circuit / Overload / Over Temperature Protection
- Cooling by free air convection
- 100% Full Load Burn-In Test
- Suitable for Constant Voltage LED Lighting
- IP67 / CE / SELV / SAA