Shopping cart

Your shopping cart is empty.

BMPRO BC300 + COMMLINK

Download Dualcom Catalog

>
SKU:
BMPRO-BC300+COMLINK
Do you have a BP35 or a J35 Battery management system installed, and planning to install an inverter / wheel movers or other high draw current device into your system?
 
BMPRO BC300 External Shunt and CommLink provides additional battery monitoring for your BatteryPlus35 and J35 systems. The addition of the BC300 to the BatteryPlus35 and J35 battery management systems allows high current loads and external charge sources to connect direct to battery via the BC300 External Shunt. This enhances system behaviour with temperature monitoring of the battery for greater protection.
 
BC300  also provides your BatteryPlus35 and J35 with additional information on battery usage so your displays such as the Trek, JControl and JHub are always up-to-date on battery Time Remaining and State of Charge.
 
If using high draw current devices connected directly to the battery -you must use the BC300 or it will result in an inacurrate battery reading on the connected monitor. 
 
The BC300 External Shunt and CommLink communicates via Bluetooth and CAN bus. The BC300 External Shunt is designed for 12V batteries up to 800AH in capacity. The shunt is rated for ±240A constant and 300A peak.

KEY FEATURES

 
- Wireless communication taking advantage of advanced Bluetooth Low Energy technology
- Simple installation and pairing procedure for end user installation
- CommLink is powered by the BatteryPlus35/J35 CAN bus and requires no additional wiring
 
Battery properties monitored:
 
- Voltage
- Current (charging / discharging)
- Energy usage (Ah)
- Temperature

 

Download Specifications: 
Do you have a BP35 or a J35 Battery management system installed, and planning to install an inverter / wheel movers or other high draw current device into your system?
 
BMPRO BC300 External Shunt and CommLink provides additional battery monitoring for your BatteryPlus35 and J35 systems. The addition of the BC300 to the BatteryPlus35 and J35 battery management systems allows high current loads and external charge sources to connect direct to battery via the BC300 External Shunt. This enhances system behaviour with temperature monitoring of the battery for greater protection.
 
BC300  also provides your BatteryPlus35 and J35 with additional information on battery usage so your displays such as the Trek, JControl and JHub are always up-to-date on battery Time Remaining and State of Charge.
 
The BC300 External Shunt and CommLink communicates via Bluetooth and CAN bus. The BC300 External Shunt is designed for 12V batteries up to 800AH in capacity. The shunt is rated for ±240A constant and 300A peak.

 

Log in or register to post review